HBP-1 · Water-based sealers
Water-based sealers
HBP-1 Patio Sealer - multipack
184,30 zł
46,08 zł / 1 L · incl. VAT
In stock · prices include VAT
multipackBulk pack ·
Buy individually: HBP-1 from 48,50 zł
Suitable for
Removes
HBP-1
Label colour: water-based sealers - concrete, block paving, brick. Suffix -1: retains the original surface colour.
Description and directions for use
HBp-1 is a high-performance all-purpose patio sealer formulated for porous external natural stone surfaces such as slate, terracotta, York stone, quarry tiles, sandstone, limestone, granite, concrete and many more stone types.
It reduces the absorbability of the substrate – ensures protection against precipitation water and penetration of harmful chemical compounds dissolved in water into the material structure. It increases the resistance of the impregnated surface to dirt, efflorescence and the development of biological contamination.
Alkali-resistant, durable – UV-resistant, solvent-free. It does not degrade the properties of the protected material in terms of gas and water vapor diffusion; the pores remain open.
Application area:
Natural stone surfaces, such as slate, terracotta, York stone, quarry tiles, sandstone, limestone, concrete
It can be used indoors and outdoors,
for old and new surfaces.
Application:
BEFORE APPLICATION:
Before application, the surface should be cleaned of dirt, dust, patina, loose elements, salt efflorescence and residues of paint coats.
Any adjacent surfaces not being treated with the product must be protected.
Never apply to wet surfaces. The product can be used on slightly damp surfaces; nonetheless, please ensure that the surface to be treated is as dry as possible.
At the time of application, surface should not be displayed in direct sunlight and rainfalls.
Note. Impregnation should not be performed on surfaces with high salinity, as this may lead to intensification of the crystallization process of construction salts and destruction of the substrate material.
APPLICATION INSTRUCTION:
HBp-1 is a ready to use product. DO NOT DILUTE.
May be applied using low pressure spray, brush or roller.
Apply the product generously and evenly on the entire area until the surface is saturated. Repeat the action several times depending on attributes and porosity of the surface by the "wet on the wet" method.
Subsequent applications MUST be applied “wet on wet” within 5-10 minutes of previous application. Do not allow the substrate to dry between application.
Depending on the properties and porosity of the protected substrate, the above procedure should be repeated 2 or 3 times.
During works and immediately after their completion, the freshly impregnated surfaces should be protected against direct sunlight and precipitation for a minimum of 5 hours.
Comments and recommendations
Do not allow the applied product to dry between applications.
Do not apply during rain or frost and when surface and air temperature is < 5°C and > 30°C.
All surfaces must be treated to saturation in 1-3 applications “wet on wet” applied, to ensure 100% product efficacy. This varies with substrate, and treating a small trial area is recommended to calculate true consumption
This information constitutes the basic guidelines for the use of the product and does not release from the obligation to perform work in accordance with the principles of art of the construction, conservation guidelines and health and safety regulations.
Before application, we recommend testing the product on a small, unexposed area.
Warnings
KEEP OUT OF REACH OF CHILDREN & PETS. ATTENTION CAUSTIC PRODUCT
The product contains: 2-methyl-2H-isothiazol-3-one
Technical specifications
Product density: approx. 1.0 kg / dm³ pH value: approx. 7
Odour: neutral
Colour: milky white, colourless after drying, transparent Resistance to rain: after 5-6 hours
Water absorption coefficient: Wd <0.1 kg / m2 x h1 / 2 or <7.5% acc. PN-EN 1504-2 / EN 13580 / Vapor diffusion resistance
water: Sd = 0.0 [m]
Alkali resistance - measured with water absorption according to PN-EN 1504-2 / EN 13580 <10%
Penetration depth:> 5 mm, measured according to EN 14630
Drying rate coefficient, class 2 to 1 / depending on the degree of absorbency of the substrate,
measured according to EN 13579
coverage: 1L covers approx. 5-11 m²
Available packaging:
1L/5L bottle
Expiry date: Up to 36 months of storage at temperatures >+ 5°C to < 30°C, in original unopened manufacturer's packaging. Water-based product that freezes at temperatures < 0°C.
