CTS Chemistry
<tc>C-12F Cleaner for white and coloured joints, cement joints</tc>
Size
It is an alkaline, intensive agent for cleaning white and coloured grout as well as wall and floor cement joints.
It removes effectively all organic dirt of fatty origin, after soap, cleaning agents and
cosmetics.
Application area
It can be used on all joints in ceramic tiles, clinker, granite, marble, travertine, brick and
stone conglomerates.
It cleans quickly and effectively.
It does not contain acids.
Slightly foaming.
Application instructions
Due to the material diversity of surfaces to be cleaned, before cleaning, a test should
be made in a hardly visible place to check whether there is an unwanted reaction, e.g.
discoloration.
Spray the substance on the joint for about 3 minutes. After this time, scrub gently with
a brush or a rough sponge, then rinse with clean water and let it dry.
In case of strong fungi and mold on the silicone joints, the substance should be applied
for about 20 minutes. After this time, scrub gently with a brush or a rough sponge and
wait about 10 more minutes. Again, scrub gently with a brush or a coarse sponge.
Then rinse it with clean water and let it dry.
If a satisfactory effect is not obtained, the steps should be repeated.
Comments and recommendations
The substance is ready to use. Do not dilute.
The general safety rules should be applied in accordance with the safety data sheet.
Before cleaning, you should be stocked up on safety equipment: goggles and protective gloves.
The contact of the C-12F Cleaner with materials not resistant to alkali action is not allowed.
Irritating to skin and eyes. A prolonged contact with the substance may damage eyes / skin.
Keep away from children.
The product includes
Alcohols, C12-15, ethoxylated, propan-2-ol, sodium hydroxide.
Technical data
- an aqueous, colourless solution
- density approx. 1 kg / dm3
- pH approx. 11.5
- smell characteristic of detergents
Packaging: 750 ml bottle with a sprayer
Expiry date
Use the substance within 36 months from the production date shown on the packaging. The mixture should be stored
and transported in tightly closed, original packaging, in dry conditions and at a temperature between + 5 ° C and + 30 ° C.
Protect against overheating. The water-based product freezes below 0 ° C.
